Stencil Cutting

Take a thin copper or brass plate, lay flat on the

side, then take a sharp edged steel, write thereon the same as common

writing, but press sufficiently hard to cut through the plate. To mark,

lay the plate thus cut upon the cloth, and apply ink by means of a

brush to the back of the plate, and it will wet the cloth where the cut

is made by the writing. A little practice will enable a person to cut

beautifully. There is money to be made at this. Some make $10 a day.

St Jacob's Oil Stick Candy facebooktwittergoogle_plusredditpinterestlinkedinmail